pop corn
A popcorn kernel is actually a seed. Like other seeds, inside it has a tiny plant embryo (a life form in its earliest phase). The embryo is surrounded by soft, starchy material that would give the embryo energy for growing into a plant. A hard, glossy shell protects the outside of the seed.
The soft, starchy material holds some water. When the kernel is heated to a high heat (400 degrees F), the water inside the kernel turns into steam. The pressure from the steam causes the kernel to explode. The soft starch inside bursts out at about 40 times its original size, turning the kernel inside out. This creates the fluffy white area of a popped kernel.
The ideal popcorn kernel contains about 14 percent moisture. If the popcorn is much drier, it will not pop. Popcorn kernels should be kept in a tightly sealed jar so that they will not dry out.
Range-Top Popping
To pop popcorn on a range-top, assemble the following:
- a 3- to 4-quart pan with a loose lid that allows steam to escape
- at least enough popcorn to cover the bottom of the pan, one kernel deep
- 1/3 cup of oil for every cup of kernels (Don't use butter!)
Heat the oil to 400 - 460 degrees Fahrenheit (if the oil smokes, it is too hot). Test the oil on a couple of kernels. When they pop, add the rest of the popcorn, cover the pan and shake to evenly spread the oil. When the popping begins to slow, remove the pan from the stove-top. The heated oil will still pop the remaining kernels.
Salting
Pre-salting kernels toughens popcorn. So, salt the popcorn after it has been popped -- or skip salt altogether and add salt-free spices.
So what's the best way to store popcorn? Airtight containers -- plastic or glass -- are your best bet to avoid moisture loss, especially when stored in a cool place like a cupboard. Avoid the refrigerator. Some say the cold storage makes the popcorn taste better, but many refrigerators contain little moisture and can dry out kernels.*
The ToT
(* taken from internet sources)
