Unseasoning a sheet pan??

The friendliest place on the web for anyone that enjoys cooking.
If you have answers, please help by responding to the unanswered posts.

Cooking4Fun

Senior Cook
Joined
Jun 23, 2020
Messages
397
Location
Buffalo
I used a cookie sheet to cook little pizzas and I put olive oil down on it to prevent sticking. Now I have orange/yellow stains. How do I remove it without going all steel wool?
 
Try heating the pan with some water in it, that normally works pretty good. vinegar and baking soda also works then use some course salt and scrub.
 
No not just wet but add water enough for at least 1/4" water, then just bring it to a boil in the oven, or on the stove if you feel comfortable doing that for about 10 minutes, remove or turn the oven off and wait until you can handle it comfortably and scrub like hell. Should work.
 
I would use baking soda. I take a sponge or cloth and wet that a little and then squeeze as much water out of it as I can. I sprinkle the surface that needs cleaning with a bit of baking soda and then rub like heck. It tends to take a lot of elbow grease, but once the top surface of that baked on oil is breached, it goes quicker. I mostly use this method on things I don't want to scratch. It can be done completely dry on the outside of a toaster and it doesn't damage the chrome. It has been know to take of paint, but not reliably.
 
What kind of pan is it? Stainless steel? Aluminum? What is the finish on it? A non stick surface?

If you use anything abrasive on a stainless steel or aluminum pan, it'll be fine. Abrasives on non stick surfaces usually will show.

If you heat polymerized oil to a high heat it will blacken the same way oil polymerizes and blackens when seasoning a cast iron pan.

If you want something that lasts, use stainless steel, aluminum, or cast iron. If you use a metal pan with a coating, then use parchment instead of oil, it will protect the food and the pan.
 
No not just wet but add water enough for at least 1/4" water, then just bring it to a boil in the oven, or on the stove if you feel comfortable doing that for about 10 minutes, remove or turn the oven off and wait until you can handle it comfortably and scrub like hell. Should work.
It's a cookie sheet. There are no edges to hold liquid on pan.
 
What kind of pan is it? Stainless steel? Aluminum? What is the finish on it? A non stick surface?

If you use anything abrasive on a stainless steel or aluminum pan, it'll be fine. Abrasives on non stick surfaces usually will show.

If you heat polymerized oil to a high heat it will blacken the same way oil polymerizes and blackens when seasoning a cast iron pan.

If you want something that lasts, use stainless steel, aluminum, or cast iron. If you use a metal pan with a coating, then use parchment instead of oil, it will protect the food and the pan.
Not sure the material. Just a standard cookie sheet. Looks aluminum. I scrubbed it with a degreaser. That helped a lot, but I fear I left behind green material from the scrub sponge. Will run pan through dishwasher to see what that does.
 
Aluminum, got it. Some bakers recommend letting your aluminum baking sheets get black over time. They say it bakes a nicer crust on whatever they are baking because it is black. Some bakers use combinations of vinegar, baking soda, to clean them up. Some use oven cleaner but don't leave it on a long time because it strips the sheet of everything and then starts to eat into the aluminum.

My personal experience because I use aluminum loaf pans and 1/2 sheet pans is that letting them get black is difficult and takes time. I use parchment over aluminum for baking, then a wet sponge takes off anything under the parchment and they stay silvery colored. The inside corners don't come clean anymore but I'm happy with them. I've had them for 20 years. When I visit others and use their baking sheets, if they are black I'm fine with that.
 
I have 4 sheet pans I picked up from a restaurant supply house. I love them!! use them all the time. I tried to keep them shiny, but it was futile. even the backsides are mysteriously stained. you know what? I love the patina!! tells a story. the time a braise overflowed in the oven, the time I burned butternut squash, etc. now I embrace the stains. they even make decent backgrounds for photos!


oyster.jpg
 
I have 4 sheet pans I picked up from a restaurant supply house. I love them!! use them all the time. I tried to keep them shiny, but it was futile. even the backsides are mysteriously stained. you know what? I love the patina!! tells a story. the time a braise overflowed in the oven, the time I burned butternut squash, etc. now I embrace the stains. they even make decent backgrounds for photos!


View attachment 71294
Any places to buy them for under say $7 each and still get good quality?
 
I've been using the Nordic Ware aluminum 1/2 sheet pans which are about 12x18 with edges. These are good quality.
They go on sale before Christmas, so they were on sale last year in later November for $21.99 for 2, or $11 each. My son's roommate is a baker and he'd used flat edgeless cookie sheets but wanted to try the 1/2 sheet pans with edges. I bought these for him for Christmas.
I don't have the flat cookie sheets that don't have edges. Those come in handy for rolling out crackers very thin, the edge doesn't get in the way of the rolling pin. I've used the back of the 1/2 sheet pans for that, so that works fine.
 
I remember they taught us in home ec that cookie sheets didn't have edges because, they bake better that way. I have personally never found a difference, but there might be some cookies that are picky about the type of breezes that go across them while they are baking. I believe the teacher said it was especially important with very light cookies. I think she meant light weight, not light coloured.
 
wow. $7? I bought mine 20 years ago, and I think they were $11. so $44 over that 20 is practically free. :D
My boss said there was a place to buy 3 cookie sheets for $10 total. I wasn't sure about the quality of those, but figured since they are the most simple pan it was plausible.
 
Back
Top Bottom